Jump to content

Recommended Posts

After my shell swap my speedo doesn't work. The shell I swapped onto is a 1990. My running gear and engine loom are from a 95 n plate. Only the engine harness was replaced, all the other wiring is original. Bearing in mind the 95 model had electric hicas and the 1990 had hydraulic hicas. The hicas has now been removed. Can anyone tell me how I can check the speed sensor signal from the socket which goes into the back of the speedo. I have a multimeter to test. Any advice or help wold be greatly appreciated. The instrument cluster is from a UK spec car I used to have. The 1990 model was originally fitted with cruise control the 95 model wasn't.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...

Important Information

Terms of Use