Black-zed Posted May 25, 2020 Share Posted May 25, 2020 hi guys, connected my data scan to the car today to check for error codes, and it's showing det sensor as being a problem. Jeff at zed world bypassed mine around 7 years ago and fitted a resistor in the wiring plug. the resistor is still in place, so any ideas what the problem may be? I cleared the code and it came straight back. Quote Link to comment Share on other sites More sharing options...
AndrewG Posted May 25, 2020 Share Posted May 25, 2020 In the first instance check the plug contacts/resistor tails for corrosion. It is also possible the IMΩ resistor has failed (in the heat). 1 Quote She's so fine, there's no tellin' where the money went - Simply irresistible. Link to comment Share on other sites More sharing options...
Black-zed Posted May 26, 2020 Author Share Posted May 26, 2020 10 hours ago, AndrewG said: In the first instance check the plug contacts/resistor tails for corrosion. It is also possible the IMΩ resistor has failed (in the heat). cool another job for when I visit jimmer then lol Quote Link to comment Share on other sites More sharing options...
Gonzo12c Posted May 26, 2020 Share Posted May 26, 2020 So many det sensor faults. Easy to get at with plenum off too. Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
JeffTT Posted May 31, 2020 Share Posted May 31, 2020 Might be the cable back to the ecu now, if your happy to keep the resister in and don`t see why not after this time, the easiest thing to do it fit the resister at the ecu end between pin 23 and earth. Ece pin out here >> https://www.nicoclub.com/archives/color-coded-ecu-pin-1990-95-z32s.html Quote Link to comment Share on other sites More sharing options...
Black-zed Posted May 31, 2020 Author Share Posted May 31, 2020 19 minutes ago, JeffTT said: Might be the cable back to the ecu now, if your happy to keep the resister in and don`t see why not after this time, the easiest thing to do it fit the resister at the ecu end between pin 23 and earth. Ece pin out here >> https://www.nicoclub.com/archives/color-coded-ecu-pin-1990-95-z32s.html cheers Jeff, I may have a look tomorrow. Quote Link to comment Share on other sites More sharing options...
Black-zed Posted June 1, 2020 Author Share Posted June 1, 2020 (edited) just to put this to bed, I found the resistor had come loose in the det sensor connector, so I cut the plug of the det sensor sub harness, soldered the resistor into that and reconnected, I reset the code, started the car a few times and the code hasn't returned. Edited June 1, 2020 by Black-zed 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.