stephenk Posted September 20, 2020 Share Posted September 20, 2020 Hi my driver door window stuck in the up when pressing switch you can hear low sound tick noise I need to remove door card but I understand the window needs to be down abit regards stephen Quote Link to comment Share on other sites More sharing options...
AndrewG Posted September 20, 2020 Share Posted September 20, 2020 It may be the power window module has developed a fault (poor solder connections): https://www.300zx.co.uk/forums/topic/114853-repair-window-module/ Sometimes you can get the thing temporarily working by pressing down on the button and thumping the door. To fix the door card needs to come off (the same applies to a seized window motor). Quote She's so fine, there's no tellin' where the money went - Simply irresistible. Link to comment Share on other sites More sharing options...
stephenk Posted September 20, 2020 Author Share Posted September 20, 2020 41 minutes ago, AndrewG said: It may be the power window module has developed a fault (poor solder connections): https://www.300zx.co.uk/forums/topic/114853-repair-window-module/ Sometimes you can get the thing temporarily working by pressing down on the button and thumping the door. To fix the door card needs to come off (the same applies to a seized window motor). I managed to get the door card off I disconnect the plug from the motor an used a test light when I put the probe on the plug it light up when pressing the window up an down switch so this makes me think it's the motor or mechanism seized regards stephen Quote Link to comment Share on other sites More sharing options...
AndrewG Posted September 21, 2020 Share Posted September 21, 2020 Check that the glass sealing rubber by the mirror sail hasn't folded over itself against the glass. This can jam the movement of the glass both ways. 1 Quote She's so fine, there's no tellin' where the money went - Simply irresistible. Link to comment Share on other sites More sharing options...
stephenk Posted September 21, 2020 Author Share Posted September 21, 2020 9 hours ago, AndrewG said: Check that the glass sealing rubber by the mirror sail hasn't folded over itself against the glass. This can jam the movement of the glass both ways. Thanks I have look hopefully it that Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.