Jump to content

Recommended Posts

My zed is near completion, I guess my insurance company need to know?

also do I have to inform DVLA that my zed is now a manual?

Not related! Before the work started I couldn’t get the key out of the ignition & it is still there & it will not come out!
When it was an auto, when you put the shifter in park & turn the ignition off it would click then the key would release.

Any body had this problem with the zed?

Art

Link to post
Share on other sites

Its a safety feature on autos, the key wont release until you put the shifter into park. 

When the auto conversion was done one of the pins needs to be connected to the neutral switch to the ecu or the ecu pin needs to be grounded.

Pin 44 on the ECU needs to be ground to bypass the safety feature or the other way is to connect a wire from the ECU to the neutral switch on the gearbox

and ground the secondary wire on the neutral switch.

There is also the relay located in the wing that needs to be bypassed using a loop 

 

 

Link to post
Share on other sites

Just been to see my zed which is all back together & running perfect!

I have decided to get the sills done (the front jacking points have been squashed) over time. 
l am expecting a hefty cost with two bills! 
 

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

Terms of Use