Jump to content

AurisZ

Premium Member
  • Content Count

    17
  • Joined

  • Last visited

Community Reputation

0 Neutral

About AurisZ

  • Rank
    Newbie User

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Time Left: 21 days and 6 hours

    • Wanted
    • Used

    A worn out stock rubber spoiler has caused my original Boot lid to rust and rot, i am looking for a clean replacement, will consider any condition as long as the glass and seals are in good condition. Will offer up to 200£ depending on the condition. Thank you in advance ❤️

    £200.00

  2. View Advert Hatch LID WANTED 2+2 (4 seater) A worn out stock rubber spoiler has caused my original Boot lid to rust and rot, i am looking for a clean replacement, will consider any condition as long as the glass and seals are in good condition. Will offer up to 200£ depending on the condition. Thank you in advance ❤️ Advertiser AurisZ Date 11/04/21 Price £200.00 Category
  3. Sounds good to me, seems like its walking distance, took the car for a ride last night, it runs great but the fan is confusing me now haha. ill Direct message you my number and feel free to give me a day/time, im on furlough so literally any time is good for me and im in no rush.
  4. Time Left: 14 days and 7 hours

    • Wanted
    • Used

    Hey guys, imported a JDM 300zx, prev owner had some crappy HID conversion and has discarded the adaptors that would hold the original h1 bulbs, converting them from 1 pin to a 2 pin as per my electrical plug. Much apreciated.

    £50.00

  5. View Advert H1 Bulb holder/Adaptor Hey guys, imported a JDM 300zx, prev owner had some crappy HID conversion and has discarded the adaptors that would hold the original h1 bulbs, converting them from 1 pin to a 2 pin as per my electrical plug. Much apreciated. Advertiser AurisZ Date 04/04/21 Price £50.00 Category Parts - Wanted  
  6. Near Wilsden Green NW London Zone2
  7. Thank you andrew, It was the MAF for the most part, now the car runs pretty good, went for a solid drive but my fan is always on; and is taking a long time to get up to temperature. Running a little rich but not as rich as it used to be with the wobbly MAF. I tested both of my Coolant temp sensors dipping it in 68F, 122F 176F both produced In-Spec resistances, the plug is getting a good constant 5vols, and the ground is found on the other pin. the relay is giving me 0.70 resistance like 3 other relays ive tested but im unable to test right now if it clicks. is there anything else i can t
  8. oh dayum, well since the ECU panel was off i thought ill ty turning the screw on the ECU, and it gave me code 12, and i shit you not when i jumped the connector under the steering wheel it gave me 55 like a week ago, but it was running quite allot better back then... should i bother testing or just replace it, or what kind of tests do you think i should do?>
  9. the trouble is, im not getting a "check engine light" or anything, ill see if i can reset the system, i had it running really well yesterday, before i started messing (swapping) the coolant temp sensors but the fan was still on. I just want it to at least hold a steady idle so i can diagnose more. Before i start ripping out the ECU i also want to make sure everything else is working for certain, like the o2 sensors, ohm the Temp sensors ect. Thanks for your insight AndrewG!
  10. Sorry the number is : The number is 23710 40P13
  11. I dont know much about ECU's nor how they may differ from other 300zx's The number is 23710 40913 The "mechanics" have had an electrician come in, told me all of the systems are working fine but then i used the "short" method where you plug a spare wire into 2 pins under steering wheel. and then you coount the light flashes on the instrument panel Ive also just started it and i swear i unpluged 3 coil packs and i couldnt notice any change in the way the engine was running, im so confused.
  12. also forgot to mention that once i got it running well and replaced the CTS for the first time i even put in brand new spark plugs NGK pfr6b-11
  13. Ive done the air intake test, fixed a small air leak in one of the intake pipes near the carbon canister. at the time i had some spark plugs that were fouled and i just cleaned them up, i have sprayed some EGR cleaner into the Idle air controllers, I have checked and cleaned the PCV valves: working fine. syncronised the throttle boddies. Started the car; rough start + idle, misfire, lots of smoke out of the exhaust. held the revs at around 2000 and after 10 seconds everything cleared up and the car was running smoothly, no fumes, running on all 6 and i noticed the Fan was always on. switched i
  14. Thank you Andrew! 54k Miles, perhaps sat for a year or so in the sun since some areas of the door cards are bubling, most likely still on the factory cambelt. ive taken off and tested the fuel pressure regulator, the entire fuel rail and balance tube has no scratches on it whatso-ever, i should think the hoses have probably never been taken off. If it was any kind of timing issue i assume i wouldnt get even a minute of flawless running on new spark plugs, tomorrow im gonna look into and test the fuel damper and spray some Carbon cleaner into the idle air adjuster and air regulator, maybe
×
×
  • Create New...

Important Information

Terms of Use